DOOSAN Excavator Bucket Teeth

Introduction

Excavator bucket teeth are important consumable parts on excavators, similar to human teeth. They are combined bucket teeth composed of tooth bases and tooth tips, which are connected by pins. Since the worn-out part of the bucket teeth is the tip of the tooth, it is only necessary to replace the tip.

Technological Process

1. Sand casting: The cost is the lowest, and the technology level and the quality of the bucket teeth are not as good as precision casting and forging casting.

2. Forging: The cost is the highest and the craftsmanship and the quality of the bucket teeth are also the best.

3. Precision casting: The cost is moderate but the requirements for raw materials are very strict, and the technology level is relatively high. Due to the ingredients, some precision casting bucket teeth even surpass the forging casting bucket teeth in terms of wear resistance and quality. At present, precision casting bucket teeth is the mainstream manufacturing process for bucket teeth on the market.

Technical Parameter

Model	Adapt machine model	Product corresponding model	Weight (kg)	Edge block pin
LD100T	DOOSAN100/120 SANY65/75	DH100/120 SANY65/75 Flat tooth	2.6	DH100
LD100A	DOOSAN100/120 SANY65/75	DH100/120 SANY65/75 (Straight port, adapt 25mm steel plate)	3.4	DH100
LD60T	SANY60	SANY60 Earthwork tooth	1.6
LD60A	DOOSAN100/120 SANY65/75	SANY60 (Straight port, adapt 25mm steel plate)	2.3	DH100
DH360TL	DOOSAN 330/360	DH330 / DH360 Long tiger tooth TL	10.0	DH360
2713-9062	DH60 LOVOL75 LONGGONG60	DH60 LOVOL75 (Straight port, adapt 20mm steel plate)	2.6
2713-1221LS	DOOSAN DX130/150	DH130/150 Rock tooth LS	4.2	DH130
2713-1220A	DOOSAN 280/300	DH280 / DH300 (Straight port, adapt 20mm steel plate)	12.5	DH300
2713-1219TL	DOOSAN 280/300	DH 280 / DH300 Long tiger tooth TL	7.1	DH300
2713-1219LS	DOOSAN 280/300	DH280 / DH300 Rock tooth LS	7.6	DH300
2713-1219LK	DOOSAN 280/300	DH280 / DH300 Rock tooth LK	8.3	DH300
2713-1219	DOOSAN 280/300	DH280 / DH300 Flat tooth	7.4	DH300
2713-1218A	DOOSAN DX200/220	DH200 / DH220 (Straight port, adapt 35mm steel plate)	9.6	DH200
2713-1217LS	DOOSAN DX200/220	DH200 / DH220 Rock tooth LS	5.6	DH200
2713-1217LK	DOOSAN DX200/220	DH200 / DH220 Rock tooth LK	6.2	DH200
2713-1217	DOOSAN DX200/220	DH200 / DH220 Flat tooth	5.3	DH200
713-00033	DOOSAN 330/360	DH330 / DH360 (Straight port, adapt 45mm steel plate)	17.7	DH360
713-00032LS	DOOSAN 330/360	DH330 / DH360 Rock tooth LS	10.6	DH360
713-00032LK	DOOSAN 330/360	DH330 / DH360 Rock tooth LS	12.3	DH360
713-00032	DOOSAN 330/360	DH330 / DH360 Flat tooth	10.3	DH360
713-00028RC	DOOSAN 420/450/480/500	DH420 / DH450 / DH480 / DH500 Rock tooth RC	16.5	DH420
713-00028LS	DOOSAN 420/450/480/500	DH420 / DH450 / DH480 / DH500 Rock tooth LS	19.0	DH420
713-00028	DOOSAN 420/450/480/500	DH420 / DH450 / DH480 / DH500 Flat tooth	12.3	DH420